Porur, Chennai, Tamil Nadu
GST No. 33BGAPS7240D1ZP
Approx. Rs 25,000 / UnitGet Latest Price
Product BrochureProduct Details:Temperature Range | 5 deg C above Ambient to 100 deg C / 150 deg C / 250 deg C |
Application | Calibration Labs, R&D, QC Divisions, Pharmaceutical Divisions, thermal calibration labs |
Brand | SGS |
Data Logging | PC interface through RS232 Communication module |
Outer | Mild steel CRCA sheet with powder coating |
Lid | Provided with sensor inserting port holes, thermometer insert hole |
Power Supply | Single Phase - 230V AC, 50 Hz |
Control Readout | Actual and set point |
Drain | Facility to drain liquid |
Glass Thermometer | Calibrated |
Liquid to be use | Oil - Flash point higher than operating temperature |
Alarm Type | Deviation High or Low |
Boost heater cut off | 2 deg C |
Controller | Digital Microprocessor based PID |
Model | Table top type |
Heating | Stainless steel Immersion heater with proper cold zone to control set point |
Temperature Controller | With 0.01 deg C display resolution |
Ambient Temperature Recommendation | 33degc |
High temperature cut off | 2 deg C |
Temperature Control | + 0.1 deg C / 0.01 deg C |
Boost Heater | For additional heat |
Display Resolution and Control Sensitivity | 0.1 deg C / 0.01 deg C up to 99.99 deg C thereafter 0.1 deg C |
Sensor | Pt 100 (RTD)- 3 wire |
Inner Tank | Stainless steel 304 grade dully polished |
Temperature Uniformity | Better than +/- 1 deg C |
Stirrer | To maintain temperature uniformity |
NABL Certified Calibration Certificate | For temperature controller |
Cooling Coil | For chilled water circulation |
200 x 200 x 200 |
Approx. Rs 63,000 / UnitGet Latest Price
Product Details:Application | Calibration Lab,R&D,QC Divisions,Pharmaceutical Divisions |
Brand | SGS |
Temperature Controller | With 0.01 deg C display resolution |
Sensor | Pt 100 (RTD)- 3 wire |
Controller | Digital Microprocessor based PID |
Inner Tank | Stainless steel 304 grade dully polished |
Insulation | PUF / Foam |
Power Supply | Single Phase - 230V AC,50 Hz |
Stirrer | To maintain temperature uniformity |
High temperature cut off | 2 deg C |
Lid | Provided with sensor inserting port holes,thermometer insert hole |
Control Readout | Actual and set point |
Condensor | Fin and tube air cooled |
Glass Thermometer | Calibrated |
Temperature Control | + 0.1 deg C / 0.01 deg C |
Compressor | Hermetically sealed Emerson / Danfoss make |
Ambient Temperature Recommendation | Less than 30 deg C |
Heating | Stainless steel Immersion heater with proper cold zone to control set point |
Refrigerant | R134a / R404a / R 508b |
Data Logging | PC interface through RS232 Communication module |
Display Resolution and Control Sensitivity | 0.1 deg C |
Voltage Stabilizer | For refrigeration system |
NABL Certified Calibration Certificate | For temperature controller |
Temperature Uniformity | Better than +/- 0.05 deg C |
Drain | Facility to drain liquid |
Alarm Type | Deviation High or Low |
Wheels | For easy moving for floor models |
Outer | Mild steel CRCA sheet with powder coating |
Model | Floor / Table top type |
Model no. | Tank Capacity in Ltr | Temp. range | Work space in mm |
SGS-05 LCB01 | 12L | -20°C to ambient | 200 X 200 X 200 |
SGS-05 LCB02 | 12L | -40°C to ambient | 200 X 200 X 200 |
SGS-05 LCB03 | 12L | -60°C to ambient | 200 X 200 X 200 |
SGS-05 LCB04 | 12L | -80°C to ambient | 200 X 200 x 200 |
Approx. Rs 27,000 / UnitGet Latest Price
Product Details:Brand | SGS |
Voltage | 230V AC |
Frequency | 50 Hz |
Phase | Single Phase |
Temperature Range | 5 deg C above Ambient to 100 deg C / 150 deg C / 250 deg C |
Approx. Rs 72,000 / UnitGet Latest Price
Product Details:Brand | SGS |
Controller | Digital Microprocessor based PID |
Ambient Temperature Recommendation | Less than 30 deg C |
Control Readout | Actual and set point |
Drain | Facility to drain liquid |
Insulation | PUF / Foam to avoid temperature loss |
Compressor | Hermetically sealed Emerson / Danfoss make |
Outer | Mild steel CRCA sheet with powder coating |
Refrigerant | R134a / R404a / R 508b |
Temperature Uniformity | Better than +/- 0.05 deg C |
High temperature cut off | 2 deg C |
Stirrer | To maintain temperature uniformity |
Sensor | Pt 100 (RTD)- 3 wire |
Display Resolution and Control Sensitivity | 0.1 deg C / 0.01 deg C up to 99.99 deg C thereafter 0.1 deg C |
Alarm Type | Deviation High or Low |
Heating | Stainless steel Immersion heater with proper cold zone to control set point |
Lid | Provided with sensor inserting port holes, thermometer insert hole |
Condensor | Fin and tube air cooled |
Liquid to be used | IPA / Methanol |
Power Supply | Single Phase - 230V AC, 50 Hz |
Temperature | -80 deg C / -40 deg C/ -20 deg C to Ambient |
Temperature Control Accuracy | +/- 0.1 deg C / 0.01 deg C |
Inner Tank | Stainless steel 304 grade dully polished |
Model | Floor / Table top type |
Explore More Products
© SGS Lab Instruments. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited