Send Email
Send SMS
Search
SGS Lab Instruments
SGS Lab Instruments


Hot Cold Humidity Chamber

Manufacturer of a wide range of products which include climatic chamber, hot and cold chamber and subzero treatment chamber.

Climatic Chamber

REQUEST CALLBACK

Climatic Chamber
Approx. Rs 2.7 Lakh / Unit
Get Best Quote

Thanks for Contacting Us.

Product Details:
Minimum Order Quantity1 Unit
climatic chambersminus 70 to 150degc
Environmental chambersminus 40degc. to 120deg.c
humidity chamberminus 40deg.c to 120dg.c
temperature humidity chamber100L

Environmental / Climatic Chambers are widely used in Chemical labs, Automobile industries, Rubber industries, Pharmaceutical division, Biotech, Fertilizer division, R&D & QC divisions.

Standard Specification
Model: Floor type
Temperature range: -20°C to 100°C/ -40°C to 150°C / -70°C to 150°C
Humidity range: 40% to 95% rh @ (30°C to 60°C)
Temperature control accuracy: + 0.1°C
Humidity Control Accuracy: + 2%
Ambient Temperature recommended < 30°C
Display resolution &Control Sensitivity of 0.1°C / 0.1%.
Control Readout for Actual and Set point
Digital Microprocessor based PID, temperature indicator cum controller
Pt 100 (RTD)- 3 wire, Class A type, for dry and wet temperature (Direct reading of Rh).
CFC free Single stage refrigeration system for cooling up to -40°C
CFC free Double stage (Cascade) refrigeration system for cooling below -40°C
Stainless steel heaters for heating to control Dry Temperature & Immersion heater to control Wet temperature.
Forced air Circulation to maintain temperature uniformity
Deviation alarms for High / Low temperatures with visual indications
Safety cut off for air circulation fan motor, heaters, Compressor.
Inner Chamber made of Stainless steel 304 grade dully polished
Outer made of Mild steel CRCA sheet with powder coating
Double walled, inner lined with Stainless steel Fully front opening door, with Handle & lock
Gasket made of Silicone / Neoprene /Magnetic type to leak proof.
Hermetically sealed Emerson / Dan foss make compressor
Fin and tube air cooled condensor
Refrigerants - CFC Free R134a / R404a & Suva 95
Specimen protection to avoid any malfunction during test condition
Viewing window 200mm x 200mm through toughened glass
Insulation thickness depends on temperature range with Ceramic wool & High density PUF – Poly Urethane Foam
Adjustable type shelves by Mesh trays
Wheels for easy moving with front locking facility
Cooling / Heating ramp rate as per Customer specified
Port Hole with rubber bung as per customer specified
Power supply: Single Phase – 230VAC, 50Hz or Three phases 440VAC, 50Hz.

Optional features
Fully Stainless steel
Programmable Controller with cyclic operation
NABL certified certificate
PC interface through RS232 / 485 Communication module with i-tool software for data logging
Machine status indicated by Hooter, Tower Lamp, time totalizer.
Environmental Chamber also available in different sizes as per customer requirements.

click for standard models & data sheet

Note: Further to the continuous development in design and specifications, SGS reserves right to change with any prior notice

 

 


Additional Information:

  • Item Code: SGS15
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: CHENNAI
  • Delivery Time: 6 to 8 WEEKS
  • Packaging Details: WOODEN PACK
  • Yes! I am interested

    View PDF

    Hot And Cold Chamber

    REQUEST CALLBACK

    Hot And Cold Chamber
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    Minimum Order Quantity1 Unit
    ApplicationIN AUTOMOBILE SPARES PARTS TESTING & R&D TESTING CENTRES
    Brandsgs make
    Dimensions450mm 450mm 450mm
    Materialstainless steel and mild steel
    Size3.5cu ft
    Weight150kg
    hot and cold chamber-60degc to 150degc
    environment temperature test chambersfor temperature testings
    climatic temperature test chambershot and cold temperatures
    below ambient temperature chambersminus temperatures
    hot cold chamber-50degc to 100degc
    heating cooling chambers-70degc to 180degc
    refrigerated hot and cold chamber swith refrigeration system
    refrigerated hot cold chamber5degc per minute
    cyclic hot and cold chamberwith programmable controller
    low and high temperature chambersminus temperature and above ambient
    hot and cold temperature test chambersminus and above ambient temperatures
    temperature test chambers-60degc to 150degc

    Hot & Cold Chambers are widely used in Chemical labs, Automobile industries, Rubber industries, Pharma division, Biotech, Fertilizer division, R&D & QC divisions, and Metallurgy testing.

    Standard Specification
    Hot and cold chamber Model: Floor type
    Hot and cold chamber Temperature range: -20°C to 100°C/ -40°C to 150°C / -80°C to 150°C
    Hot and cold chamber Temperature control accuracy: + 0.1°C
    Ambient Temp. Recommended: < 30°C
    Hot and cold chamber Display resolution & Control Sensitivity of 0.1°C
    Hot and cold chamber Control Readout for Actual and Set point
    Hot and cold chamber with Digital Microprocessor based PID, temperature indicator cum controller
    Hot and cold chamber with Temperature Sensor Pt 100 (RTD)- 3 wire, Class A.
    Hot and cold chamber with CFC free Single stage refrigeration system for Cooling up to -40°C
    Hot and cold chamber with CFC free Double stage (Cascade) refrigeration system for Cooling below -40°C
    Hot and cold chamber provided with Heating by SS Air heater to control Set temperatures
    Hot and cold chamber provided with Forced Air Circulation to maintain temperature uniformity
    Hot and cold chamber with Deviation alarms for High or Low temperatures with visual indications
    Hot and cold chamber Inner Chamber made of Stainless steel 304 grade dully polished
    Hot and cold chamber Outer made of Mild steel CRCA sheet with powder coating
    Hot and cold chamber door Double walled, Fully front opening, inner lined with SS, Handle & lock
    Hot and cold chamber with Gasket type Silicone / Neoprene /Magnetic
    Hot and cold chamber refrigeration system with Hermetically sealed Emerson / Danfoss make compressor,
    Fin and tube air cooled condensor
    Hot and cold chamber used with CFC Free refrigerants R134a / R404a & Suva 95
    Hot and cold chamber with Specimen protection to avoid any malfunction during test condition
    Hot and cold chamber provided with Viewing window: 200mm x 200mm through toughened glass(If required)
    Hot and cold chamber Insulation by Ceramic wool & High density PUF – Poly Urethane Foam to avoid temperature loss
    Shelves Adjustable type, with Mesh trays.
    Wheels for easy moving with front locking facility
    Power supply - Single Phase – 230VAC, 50Hz / Three phase 440VAC,50Hz.
    Cooling / Heating ramp rate: As per Customer requirement
    Port Hole : As per customer requirement

    Optional features
    Hot and cold chamnber with Programmable Controller with cyclic operation
    Hot and cold chamber with NABL certified Calibration certificate
    Hot and cold chamber with PC interface through RS232 / 485 Communication module for data logging
    Machine status indicated by Hooter , tower lamp, Time Totalizer
    Hot & Cold Chamber also available in different sizes as per customer requirements.

    Click for standard models & data sheet

    Note: For continuous development the above technical specification & design, SGS reserves rights to change without any prior notice.


    Additional Information:

  • Item Code: SGS14
  • Pay Mode Terms: T/T (Bank Transfer),cheque
  • Port of Dispatch: CHENNAI
  • Production Capacity: 3
  • Delivery Time: 6 to 8 WEEKS
  • Packaging Details: WOODEN PACK
  • Yes! I am interested

    View PDF

    Subzero Treatment Chamber

    REQUEST CALLBACK

    Subzero Treatment Chamber
    Approx. Rs 1.98 Lakh / Unit
    Get Best Quote

    Thanks for Contacting Us.

    Product Details:
    Minimum Order Quantity1 Unit
    subzero treatment chamber-70deg.c
    Cold chamberimpact testings

    Subzero treatment chamber are widely used in Chemical labs, Automobile industries, Rubber industries, Heat treatment labs, R&D & QC divisions, Electronics, Insulators testing and Metallurgy testing.

    Standard Specification
    Subzero treatment chamber Model: Floor type – Front / Top loading
    Subzero treatment chamber Temperature range : -20°C to Ambient/ -40°C to ambient / -80°C to ambient.
    Subzero treatment chamber Temperature control accuracy for cold chamber: + 0.1°C.
    Temperature control accuracy for Subzero chamber: + 2°C
    Ambient Temp. Recommendation < 30°C
    Sub zero treatment chamber Display resolution & Control Sensitivity of 0.1°C
    Control Readout for Actual and Set point
    Subzero treatment chamber with Digital Microprocessor based PID, temperature indicator cum controller.
    Temperature sensor Pt 100 (RTD)- 3 wire, Class A.
    Subzero treatment chamber with CFC free Single stage refrigeration system for Cooling up to -40°C
    Subzero treatment chamber CFC free Double stage (Cascade) refrigeration system for Cooling below -40°C
    SS Air heater for heating to control Set temperatures (for better accuracy)
    Forced air Circulation to maintain temperature uniformity – Cold chamber
    Without Air circulation for subzero treatment chamber.
    Deviation alarms for High or Low temperatures with visual indications.
    Subzero treatment chamber Inner Chamber made of Stainless steel 304 grade dully polished
    Subzero treatment chamber Outer made of Mild steel CRCA sheet with powder coating
    Subzero treatment chamber door Double walled, fully front opening Door inner lined with Stainless steel, Handle & lock
    Magnetic type gasket for leak proof.
    Subzero treatment chamber refrigeration system with Hermetically sealed Emerson / Danfoss make, Compressor
    Fin and tube air cooled type condensor
    Subzero treatment chamber with CFC Free refrigerants R134a / R404a & Suva 95
    Subzero treatment chamber Insulation with High density PUF – Poly Urethane Foam
    Subzero treatment chamber with Adjustable type shelves with Mesh trays (for vertical mode)
    Wheels for easy moving with front locking facility
    Power supply - Single Phase – 230VAC, 50Hz or Three phase 440VAC,50Hz.
    Port Hole as per customer specified (if required)

    Optional features
    Subzero treatment chamber with Digital Timer
    Programmable Controller with cyclic operation
    NABL certified certificate for temperature controller
    PC interface through RS232 / 485 Communication for data logging
    Machine status indication by Hooter, Tower lamp
    Cold Chamber also available in different sizes as per customer requirements.

    Click for standard models & data sheet

    Note: For continuous development the above technical specification & design, SGS reserves rights to change without any prior notice.

    Yes! I am interested

     
    X


    Contact via E-mail
    Contact via SMS
    SGS Lab Instruments
    S. G. Satheesh Kumar (Proprietor)
    Plot No. 33, Officers Colony, Porur ,
    Chennai - 600116, Tamil Nadu, India
    Call Us: 
    Call Response Rate: 76%
    Share Us :
    F G T L



    Home  |   About Us   |  Products & Services  |  Site Map  |   Contact Us   |   Mobile Site

    © SGS Lab Instruments. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    SGS Lab Instruments