|Minimum Order Quantity||1 Unit|
Oil bath are widely used in Calibration Labs, R&D, QC divisions, Pharmaceutical divisions.
Model: Table top type
Temperature range: 5°C above Ambient to 100°C / 150°C / 250°C
Temperature control accuracy: + 0.1°C / 0.01°C
Temperature Uniformity better than + 1°C
Ambient Temp. Recommended: Ambient
Display resoltuion & Control Sensitivity of 0.1°C / 0.01°C up to 99.99°C thereafter 0.1°C
Control Readout for Actual and Set point
Digital Microprocessor based PID, temperature indicator cum controller
Temperature sensor Pt 100 (RTD)- 3 wire, Class A.
Continuous running Stirrer to Maintain temperature uniformity
Automatic High temperature cut off: 2.0°C
Automatic Boost heater cut off: 2.0°C
Facility to drain liquid
Heating by Stainless steel Immersion heater with proper cold zone to control set point
Deviation alarms for High or Low temperature with visual indication
Inner tank made of Stainless steel 304 grade dully polished
Outer made of Mild steel CRCA sheet with powder coating
Lid provided with sensor inserting port holes, thermometer insert hole
Boost heater for additional fast heating
Liquid to be used- OIL -Flash point to be higher than operating temperature
Power supply: Single Phase – 230VAC, 50Hz
Fully Stainless steel
Cooling coil for chilled water circulation
Glass Thermometer Calibrated
NABL Certified Calibration Certificate
PC interface through RS232 Communication module for data logging
Temperature controller with 0.01°C display resolution
High Temperature Calibration bath also available as per customer requirements.
Click for standard models & data sheet
Note: For continuous development the above technical specification & design, SGS reserves rights to change without any prior notice.